# Amazon EMR runtime for Apache Spark and Flarion: the published facts in the same rows

Side by side, read 10 Nov 2026

**The short answer.** Amazon EMR runtime for Apache Spark and Flarion are set out here in the same rows: published speed and cost results, code and cluster changes, tuning, stack fit, where each runs and how open the tests are. The Ledger holds 1 published entry for Amazon EMR runtime for Apache Spark and 2 entries for Flarion, each with who ran it.

## The same rows for both

| Row | Amazon EMR runtime for Apache Spark | Flarion |
| --- | --- | --- |
| Kind | AWS-tuned Spark runtime on EMR | Rust and DataFusion engine as one JAR |
| Does well | AWS describes the runtime as 100% API compatible with open source Spark, so Spark jobs need no code changes. AWS publishes aws-samples/emr-spark-benchmark, a TPC-DS harness for a 3 TB Parquet dataset with steps for OSS Spark, EMR on EC2 and EMR Serverless. | Flarion lists prices: $0.009 per CPU hour for self-hosted Spark, $0.012 for fully managed Spark such as EMR, $0.095 per DBU on Databricks and $0.75 per CPU per month on premises. Its benchmarks page publishes the machine, Spark 3.5.5 baseline, engine builds, memory budgets and per-query caps, and discloses that q72 is counted at vanilla Spark's time for Gluten and Comet. |
| Limited | The runtime is proprietary to AWS and available only where EMR, EMR on EKS and EMR Serverless are, so jobs on other Spark hosts must migrate first. AWS's up to 4.5x figure names no TPC-DS scale or cluster, and the benchmark repository gives commands and configs but no results. | Flarion is proprietary and not downloadable (the page says contact us), and no repository or scripts were found for its benchmarks. A published list of supported Spark versions: none found on 2026-11-10. Third-party benchmarks of Flarion: none found on 2026-11-10. |
| Published speed results | AWS says the performance-optimized runtime executes up to 4.5x faster than open-source equivalents while delivering 2.7x faster Iceberg write performance. The page does not state the TPC-DS scale or cluster for these figures. | The home page headline is 'Run faster, spend less, scale further, without changing a line of code', with tiles for 6 minute setup, 3x performance gains and 60% cost reduction. The tiles carry no workload or method on the page. The benchmarks page (September 2026) compares six engines on TPC-DS (103 queries) on one i4i.8xlarge reading Parquet from S3. Flarion is faster than vanilla Spark, Comet and Gluten, and slower than Databricks Photon in both scales. At 100 GB: Spark 1,135 s, Flarion 386 s, Photon 362 s. At 1 TB: Spark 135.6 min, Flarion 38.3 min, Photon 30.4 min. The page labels these as benchmark figures, not customer results, and not an audited TPC result. |
| Published cost results and prices | EMR on EC2 price is added to the EC2 and EBS price. EMR on EKS is charged per vCPU-hour and GB-hour requested, from image download until pod end, rounded to the second, with a one-minute minimum, plus EKS and EC2 or Fargate cost. EMR Serverless is also available. Exact rates are region-specific and loaded by script on the page. | Usage-based list prices: self-hosted Spark on AWS, Azure or GCP $0.009 per CPU hour; fully managed Spark (EMR, GCP managed Spark, Azure HDInsight) $0.012 per CPU hour; Databricks $0.095 per DBU; on-premises $0.75 per CPU per month. Billing is on accelerated Spark cores (driver plus executors). A free assessment simulates each job from logs and reports projected runtime and compute. |
| Code changes | Runtime is described as 100% API compatible with open source Spark, so Spark jobs need no code changes, but jobs must run on EMR (a migration if currently on other Spark hosts). | Flarion is one JAR inside the existing cluster, with no agents or separate services. UDFs and UDAFs run on Spark as before. Operations Flarion does not accelerate run on Spark automatically. The page lists a 'one config change' install and says you can turn it off with one config change to compare. |
| Tuning | The EMR docs list optimizations such as adaptive query execution, dynamic partition pruning, Bloom filter join and optimized join reorder. AQE-related features are on by default; some can be tuned with Spark properties. | The FAQ says existing Spark tuning carries over and is kept; Flarion changes how the engine executes. The garbage-collection post says native memory is managed off-heap with no GC pauses, but part of a job (driver, planning, unsupported operators, often the final write) still runs on the JVM heap. Telemetry marks each stage native or Spark with runtime and memory. |
| Spark versions, platforms and table formats | EMR supports Apache Iceberg v3 and Spark 4.0 per the features page, and runs on EMR on EC2, EMR on EKS and EMR Serverless. | Platforms listed: Databricks (init scripts), Amazon EMR (bootstrap action), Google Cloud Dataproc, Azure HDInsight, Spark on Kubernetes (Helm chart or Spark operator) and on-premises. Frameworks: Scala Spark, PySpark, Trino, Ray. Table formats: Iceberg, Delta Lake, Hudi. File formats: Parquet, Avro, JSON. The benchmark ran Spark 3.5.5 and Databricks 16.4 LTS (Spark 3.5.2). A supported-version list is not published; a blog post mentions staying on Spark 3.4 and gaining newer-Spark benefits. |
| Where it runs | AWS only. EMR runtime is available where EMR, EMR on EKS and EMR Serverless are available, and EMR on AWS Outposts is mentioned on the pricing page. | No special hardware: Flarion runs CPU-native on the fleet already in use (FAQ contrasts it with GPU accelerators). It is usable on AWS, Azure, GCP, on-premises and air-gapped setups. The company is SOC 2 Type II certified per the home page. |
| How open its benchmarks are | AWS publishes aws-samples/emr-spark-benchmark with steps to run TPC-DS on OSS Spark (EC2 via Flintrock), EMR on EC2, EMR Serverless and a link to EMR on EKS. It uses a 3 TB TPC-DS Parquet dataset in a public S3 bucket, 3 iterations, and 104 queries with a pre-built spark-benchmark-assembly-3.3.0.jar. The repo gives commands and configs; it does not state results. The repo README notes that on OSS Spark query q95 did not complete, so it was rerun alone and merged, and says this was not an issue on EMR. This shows the OSS baseline needed manual handling. A companion repo aws-samples/emr-on-eks-benchmark has the EMR on EKS TPC-DS benchmark with 3 TB examples and notes scale factor and executor config must change for 100 GB or 1 TB. | The benchmark page publishes the machine, Spark 3.5.5 baseline, engine builds (Comet 1.0.0, Gluten 1.7.0 Velox, Databricks DBR 16.4 LTS), memory budgets, shuffle partitions (64), AQE on, no statistics/CBO, per-query caps (600 s at 100 GB, 1,800 s at 1 TB) and lower of two runs at 100 GB and one run at 1 TB. It discloses that q72 is counted at vanilla Spark's time for Gluten and Comet. It says the open-source engines can be rerun from public releases, but Flarion itself is not downloadable ('contact us'), and no repo or scripts were found. |
| Change Budget: code | No code change stated. AWS describes the runtime as 100% API compatible with open source Spark, so Spark jobs need no code changes. | No code change stated. Flarion says UDFs and UDAFs run on Spark as before and operations it does not accelerate run on Spark automatically. The home page headline says 'without changing a line of code'. |
| Change Budget: cluster | Run the jobs on an EMR release. Jobs must run on EMR (EC2, EKS or Serverless); a team on other Spark hosts migrates first. AQE-related features are on by default, and some can be tuned with Spark properties. | One JAR and one config change. Flarion is one JAR inside the existing cluster, installed with a one config change and switched off with one config change. Existing Spark tuning carries over. |
| Change Budget: cloud | AWS only. AWS lists the runtime where EMR, EMR on EKS and EMR Serverless are available, and mentions EMR on AWS Outposts. | No single cloud required. Flarion lists Databricks, Amazon EMR, Google Cloud Dataproc, Azure HDInsight, Spark on Kubernetes and on-premises, and says it supports air-gapped setups. |
| Change Budget: vendor | EMR charges added to EC2 and EBS. The EMR price is added to the EC2 and EBS price. EMR on EKS is charged per vCPU-hour and GB-hour requested, plus EKS and EC2 or Fargate cost. | Flarion license at usage-based prices. Flarion lists $0.009 per CPU hour (self-hosted), $0.012 (fully managed Spark), $0.095 per DBU (Databricks) and $0.75 per CPU per month (on premises), billed on accelerated Spark cores. |
| Ledger entries | [EMR runtime claim on the AWS features page](/ledger/amazon-emr-runtime-features-page-claim/) (run by its maker) | [Flarion TPC-DS SF100, six engines on one machine](/ledger/flarion-tpcds-sf100-six-engines/) (run by its maker); [Flarion TPC-DS SF1000, six engines on one machine](/ledger/flarion-tpcds-sf1000-six-engines/) (run by its maker) |

Options in alphabetical order. Vendor statements are the vendor's own. Read 10 Nov 2026.

## How to read this page

The rows hold what each vendor or a named third party published, with no conclusion drawn. Benchmarks in the two columns were run on different hardware, data and baselines unless the Ledger entry says otherwise, so the numbers are not comparable across columns. The [Ledger method](/ledger/method/) explains how entries are recorded.

## Sources

- Amazon EMR runtime for Apache Spark: aws.amazon.com/emr/features/spark: https://aws.amazon.com/emr/features/spark/ (read 10 Nov 2026)
- Amazon EMR runtime for Apache Spark: github.com/aws-samples/emr-spark-benchmark: https://github.com/aws-samples/emr-spark-benchmark (read 10 Nov 2026)
- Amazon EMR runtime for Apache Spark: github.com/aws-samples/emr-on-eks-benchmark: https://github.com/aws-samples/emr-on-eks-benchmark (read 10 Nov 2026)
- Amazon EMR runtime for Apache Spark: aws.amazon.com/emr/pricing: https://aws.amazon.com/emr/pricing/ (read 10 Nov 2026)
- Amazon EMR runtime for Apache Spark: docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-spark-performance.html: https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-spark-performance.html (read 10 Nov 2026)
- Flarion: flarion.io: https://www.flarion.io/ (read 10 Nov 2026)
- Flarion: flarion.io/benchmarks: https://www.flarion.io/benchmarks (read 10 Nov 2026)
- Flarion: flarion.io/pricing: https://www.flarion.io/pricing (read 10 Nov 2026)
- Flarion: flarion.io/faqs: https://www.flarion.io/faqs (read 10 Nov 2026)
- Flarion: flarion.io/product: https://www.flarion.io/product (read 10 Nov 2026)

Last reviewed 10 Nov 2026. Canonical: https://sparkaccelerationcompare.com/compare/emr-spark-runtime-vs-flarion/
